d |
120 mm |
D |
150 mm |
B |
16 mm |
Di |
135.6 mm | Inner diameter outer ring |
DM |
135 mm | rolling element pitch circle diameter |
da |
134.4 mm | outer diameter inner ring |
h |
16 mm | height of individual ring |
|
0 | Height of individual ring upper tolerance |
|
-0.01 | Height of individual ring lower tolerance |
r min |
1 mm | chamfer dimension |
S |
1.5 mm | diameter of lubrication hole |
T min |
-30 °C | Minimum operating temperature |
T max |
80 °C | Maximum operating temperature |
|
0.01 mm | Running accuracy, radial |
|
0.01 mm | Running accuracy, axial |
VSP min |
0.005 mm | Minimum bearing preload |
VSP max |
0.02 mm | Maximum bearing preload |
Ca |
39,500 N | Basic dynamic load rating, axial |
C0a |
140,000 N | Basic static load rating, axial |
Cr |
28,000 N | Basic dynamic load rating, radial (only for radial loads) |
C 0r |
69,000 N | Basic static load rating, radial (only for radial loads) |
NG oil |
565 1/min | Speed limit for preload oil lubrication |
NG Grease |
280 1/min | Grease lubrication with preload limited speed |
|
61824 | Dimensions are the same as ISO dimension series 18 |