Thrust roller bearing is used to bear the combined axial and radial load dominated by axial load, but the radial load shall not exceed 55% of the axial load.
Part Number |
d - Bore |
D - Outer Diameter |
B - Width |
Cr - Dynamic Radial Rating |
Cor - Static Radial Rating |
Reference speed |
Limiting speed |
|---|---|---|---|---|---|---|---|
| K81105-TV/0-8 | 25 mm | 42 mm | - | - | - | 3650 rpm | 8900 rpm |
| K81106-TV-A-HLA/0-8 | 30 mm | 47 mm | - | - | - | 3050 rpm | 7500 rpm |
| K81107-TV | 35 mm | 52 mm | - | - | - | 2600 rpm | 6600 rpm |
| K81109-TV-A-HLA/0-8 | 45 mm | 65 mm | - | - | - | 1970 rpm | 5200 rpm |
| K81111-TV | 55 mm | 78 mm | - | - | - | 1330 rpm | 4350 rpm |
| KT811-MPA | 203.2 mm | 419.1 mm | - | - | - | - | 500 rpm |
| KT921-MPA | 234.95 mm | 546.1 mm | - | - | - | - | 400 rpm |
| KT711-MPA | 177.8 mm | 368.3 mm | - | - | - | - | 560 rpm |
| KT911-MPA | 228.6 mm | 482.6 mm | - | - | - | - | 480 rpm |
| KT1120-MPA | 279.4 mm | 603.25 mm | - | - | - | - | 360 rpm |
| KT921 | 234.95 mm | 546.1 mm | - | - | - | - | 400 rpm |
| KT711 | 177.8 mm | 368.3 mm | - | - | - | - | 560 rpm |
| KT811 | 203.2 mm | 419.1 mm | - | - | - | - | 500 rpm |
| KT911 | 228.6 mm | 482.6 mm | - | - | - | - | 480 rpm |
| KT1120 | 279.4 mm | 603.25 mm | - | - | - | - | 360 rpm |
| 81102-TV | 15 mm | 28 mm | - | - | - | 6300 rpm | 13400 rpm |
| 81103-TV | 17 mm | 30 mm | - | - | - | 5400 rpm | 12300 rpm |
| 81104-TV | 20 mm | 35 mm | - | - | - | 4300 rpm | 10500 rpm |
| 81105-TV | 25 mm | 42 mm | - | - | - | 3500 rpm | 8600 rpm |
| 81106-TV | 30 mm | 47 mm | - | - | - | 3050 rpm | 7500 rpm |